szczegółowe informacje o produktach

Do domu > produkty >

Nitinol Round Wire ASTM F2063 Certified Precision Drawn Nickel-Titanium Round Wire with Multi Polished Surface Finishes

produkty

Produkty spawalnicze na bazie niklu

Pianka niklowa

Skontaktuj się z nami

Skontaktuj się teraz

Nitinol Round Wire ASTM F2063 Certified Precision Drawn Nickel-Titanium Round Wire with Multi Polished Surface Finishes

MOQ:	1Meter
Ceny:	Negotiatable
standardowe opakowanie:	skrzynka
Okres dostawy:	2-30 dni
metoda płatności:	T/T, Western Union
Pojemność dostaw:	20000 sztuk tygodniowo

Szczegółowe informacje

Opis produktu

Szczegółowe informacje

Miejsce pochodzenia

Jiangsu, Chiny

Nazwa handlowa

niktech

Orzecznictwo

ISO 9001:2008

Numer modelu

nitinol

1Meter

Czas realizacji:

7-20 dni

Pojemność:

500000 pCS miesięcznie

Uszczelka:

Neutralne opakowanie

Powierzchnia:

Jasna powierzchnia

Szereg:

Stop NITI

Aplikacja:

wniosek o zastosowanie medyczne

Kształt:

Okrągły drut

Podkreślić:

Nitinol round wire ASTM F2063 certified

Nickel-titanium round wire multi polished

Precision drawn Nitinol wire

Opis produktu

Nitinol Round Wire ASTM F2063 Certified Precision Drawn Nickel-Titanium Round Wire with Multi Polished Surface Finishes

1. Product Description

Produced via dual vacuum induction and arc remelting followed by multi-pass cold drawing, this nitinol round wire strictly locks nickel-titanium atomic ratios within ASTM F2063 thresholds to cut trace harmful impurities. Customized heat treatment calibrates precise Af transformation points ranging from -30°C to 70°C, balancing stable room-temperature superelasticity and thermal-activated shape memory. Multi-stage surface polishing eliminates micro burrs to boost biocompatibility and cyclic fatigue lifespan, with tightly controlled diameter tolerances covering ultra-fine micro strands to thick structural wire. Tunable mechanical performance fits minimally invasive medical hardware, orthodontic appliances and lightweight aerospace micro actuation assemblies across all global regions.

2. Standard Parameter Table (Chemistry / Mechanical / Dimension / Executive Standard Calibrated)

Classification	Specific Specification	Supplementary Notes
Chemical Composition (wt%, ASTM F2063)	Ni:54.5–57.0, Ti:Balance; C≤0.005, Fe≤0.025, O+N≤0.05, H≤0.002, Co/Cu/Cr≤0.005	Medical VIM-VAR clean melt grade
Superelastic UTS (22℃ Test)	≥1000–1300 MPa	Graded per alloy code S/C/D
Minimum Elongation	≥10%	Straightened SE delivery status
Upper Plateau Stress	≥400–480 MPa	Corresponding to alloy grade
Permanent Set after 6% Strain	＜0.5%	Low deformation for implant long-term stability
Optional Af Transformation Temp	-30℃ / -20℃ / 0–15℃ / 17±7℃ / 30±10℃ / 50±10℃ / 70±10℃	Custom thermal tuning supported
Full Diameter Range	0.013mm – 4.0mm	Ultra-fine micro wire to thick industrial round wire
Diameter Tolerance Rule	0.013–0.05mm: ±0.002mm; 0.08–0.26mm: ±0.004–0.005mm; 0.35–4.0mm: ±0.007–0.02mm	Tighter tolerance available on request
Available Surface Treatments	Black oxide, light oxide, etched, bright polished, ultra-gloss ground finish	Biocompatible polishing for implant use
Mandatory Executive Standards	ASTM F2063-18, ASTM F2516-18, ISO 10993	Global medical & aerospace alloy benchmarks
Standard Delivery Forms	Spooled continuous wire, fixed cut lengths, compact coils	Tangle-free uniform winding

3.Advantage

Double vacuum melting drastically reduces internal inclusions, supporting millions of cyclic bending without fatigue fracture for permanent implant devices
Wide spectrum of customizable Af temperatures to match human physiological temperature and aerospace extreme thermal cycling environments
Multi-grade superelastic mechanical indexes, providing gentle continuous force for orthodontic alignment and high rigidity for interventional guidewires
Graded ultra-tight diameter tolerances for micro minimally invasive instruments and large industrial shape-memory actuators
Multiple optional surface finishes, balancing low-friction biocompatibility for surgery and cost-effective oxidation surface for industrial actuation
Tangle-free spool & fixed-length cutting processing, lowering secondary shaping and laser machining difficulty for downstream workshops

4. Application

This nitinol round wire serves as core raw semi-finished material for cardiovascular guidewires, stone retrieval baskets, vascular braided stent filaments and orthodontic archwires across North America and Europe’s medical device labs. It also covers endodontic root canal files, intrauterine contraceptive components and minimally invasive endoscopic tool skeletons. For aerospace, Southeast Asian and Middle Eastern precision machinery sectors, it functions as micro thermal actuator wire, lightweight sensor reset components and corrosion-resistant industrial spring strands.

5. FAQ

Q1: How to select the correct Af temperature grade of nitinol round wire for human body implantation?

A: Pick grades with Af ranging from 10–30℃; these achieve complete shape recovery under 37℃ human body temperature for self-expanding implant deployment.

Q2: What surface finish is required for permanent implant-grade nitinol round wire?

A: Bright polished or ultra-gloss centerless ground finishes are recommended, which form a dense passive titanium oxide film to block nickel ion leaching inside bodily fluid.

Q3: Can ultra-fine nitinol round wire below 0.05mm be customized for micro catheter accessories?

A: All diameters from 0.013mm upwards can be produced with customized length and transformation temperature to fit micro interventional equipment design.

Q4: What testing standard regulates the mechanical performance of superelastic nitinol round wire?

A: All tensile, plateau stress and permanent set testing follows ASTM F2516-18 under 22℃ constant laboratory temperature.

Tagi:

stopu ti,

Stopy tytanu,

Pręt ze stopu tytanu

Zalecane produkty

Pręty ze stopu tytanu Gr.4 walcowane na zimno do konstrukcji lotniczych 0,6 mm 0,8 mm 0,9 mm

Skontaktuj się teraz

Gr.7 Pręty z stopów tytanu do silnych środowisk kwaśnych Rury dla przemysłu jądrowego

Skontaktuj się teraz

Biocompatible Nitinol Flat Wire with Shape Memory for Medical Use in Orthopedic Fixation Devices

Skontaktuj się teraz

Nitinol Round Wire Superelastic Strand for Orthodontic Archwire with Oral-Temperature Responsive Ultra-Smooth Polished High Cyclic Fatigue Resistance

Skontaktuj się teraz

Medical Grade Nitinol Round Wire VIM-VAR Superelastic Strand with Body-Temperature Matched Af for Cardiovascular Guidewire

Skontaktuj się teraz

Nitinol Tube ASTM F2063 VIM-VAR Alloy Hypotube with Ultra-Low Inclusion for Neurovascular Minimally Invasive Devices

Skontaktuj się teraz

Nitinol Tube High Temperature Resistant Shape Memory Alloy Tubing for Aerospace Sensing Pipeline

Skontaktuj się teraz

szczegółowe informacje o produktach

produkty

Stop Monelu

Stop Inconelu

Odporność Stopy

Stopy rozszerzające

Stop Incoloy

Stop Hastelloyu

Stop kobaltu

Miękki stop magnetyczny

Czysty nikiel

Stal nierdzewna

Metal szlachetny

Produkty spawalnicze na bazie niklu

Stop o wysokiej temperaturze

Inni

Stop miedzi i berylu

Pianka niklowa

Nitinol Round Wire ASTM F2063 Certified Precision Drawn Nickel-Titanium Round Wire with Multi Polished Surface Finishes

MOQ:	1Meter
Ceny:	Negotiatable
standardowe opakowanie:	skrzynka
Okres dostawy:	2-30 dni
metoda płatności:	T/T, Western Union
Pojemność dostaw:	20000 sztuk tygodniowo

Szczegółowe informacje

Opis produktu

Szczegółowe informacje

Miejsce pochodzenia

Jiangsu, Chiny

Nazwa handlowa

niktech

Orzecznictwo

ISO 9001:2008

Numer modelu

nitinol

MOQ:

1Meter

Czas realizacji:

7-20 dni

Pojemność:

500000 pCS miesięcznie

Uszczelka:

Neutralne opakowanie

Powierzchnia:

Jasna powierzchnia

Szereg:

Stop NITI

Aplikacja:

wniosek o zastosowanie medyczne

Kształt:

Okrągły drut

Minimalne zamówienie:

1Meter

Cena:

Negotiatable

Szczegóły pakowania:

skrzynka

Czas dostawy:

2-30 dni

Zasady płatności:

T/T, Western Union

Możliwość Supply:

20000 sztuk tygodniowo

Podkreślić

Nitinol round wire ASTM F2063 certified

Nickel-titanium round wire multi polished

Precision drawn Nitinol wire

Opis produktu

Nitinol Round Wire ASTM F2063 Certified Precision Drawn Nickel-Titanium Round Wire with Multi Polished Surface Finishes

1. Product Description

2. Standard Parameter Table (Chemistry / Mechanical / Dimension / Executive Standard Calibrated)

Classification	Specific Specification	Supplementary Notes
Chemical Composition (wt%, ASTM F2063)	Ni:54.5–57.0, Ti:Balance; C≤0.005, Fe≤0.025, O+N≤0.05, H≤0.002, Co/Cu/Cr≤0.005	Medical VIM-VAR clean melt grade
Superelastic UTS (22℃ Test)	≥1000–1300 MPa	Graded per alloy code S/C/D
Minimum Elongation	≥10%	Straightened SE delivery status
Upper Plateau Stress	≥400–480 MPa	Corresponding to alloy grade
Permanent Set after 6% Strain	＜0.5%	Low deformation for implant long-term stability
Optional Af Transformation Temp	-30℃ / -20℃ / 0–15℃ / 17±7℃ / 30±10℃ / 50±10℃ / 70±10℃	Custom thermal tuning supported
Full Diameter Range	0.013mm – 4.0mm	Ultra-fine micro wire to thick industrial round wire
Diameter Tolerance Rule	0.013–0.05mm: ±0.002mm; 0.08–0.26mm: ±0.004–0.005mm; 0.35–4.0mm: ±0.007–0.02mm	Tighter tolerance available on request
Available Surface Treatments	Black oxide, light oxide, etched, bright polished, ultra-gloss ground finish	Biocompatible polishing for implant use
Mandatory Executive Standards	ASTM F2063-18, ASTM F2516-18, ISO 10993	Global medical & aerospace alloy benchmarks
Standard Delivery Forms	Spooled continuous wire, fixed cut lengths, compact coils	Tangle-free uniform winding

3.Advantage

Double vacuum melting drastically reduces internal inclusions, supporting millions of cyclic bending without fatigue fracture for permanent implant devices
Wide spectrum of customizable Af temperatures to match human physiological temperature and aerospace extreme thermal cycling environments
Multi-grade superelastic mechanical indexes, providing gentle continuous force for orthodontic alignment and high rigidity for interventional guidewires
Graded ultra-tight diameter tolerances for micro minimally invasive instruments and large industrial shape-memory actuators
Multiple optional surface finishes, balancing low-friction biocompatibility for surgery and cost-effective oxidation surface for industrial actuation
Tangle-free spool & fixed-length cutting processing, lowering secondary shaping and laser machining difficulty for downstream workshops