rincian produk

Rumah > Produk >

Nitinol Round Wire ASTM F2063 Certified Precision Drawn Nickel-Titanium Round Wire with Multi Polished Surface Finishes

Produk

Produk pengelasan berbasis nikel

Nitinol Round Wire ASTM F2063 Certified Precision Drawn Nickel-Titanium Round Wire with Multi Polished Surface Finishes

MOQ:	1 meter
Harga:	Negotiatable
kemasan standar:	Kotak
Periode pengiriman:	2-30 hari
metode pembayaran:	T/T, Western Union
Kapasitas Pasokan:	20000pcs per minggu

Informasi Rinci

Deskripsi Produk

Informasi Rinci

Tempat asal

Jiangsu, Tiongkok

Nama merek

niktech

Sertifikasi

ISO 9001:2008

Nomor model

nitinol

1 meter

Waktu Pimpin:

7-20 hari

Kapasitas:

500000pcs per bulan

Sedang mengemas:

Pengepakan Netral

Permukaan:

Permukaan cerah

Seri:

Paduan Niti

Aplikasi:

aplikasi penggunaan medis

Membentuk:

kawat bundar

Menyoroti:

Nitinol round wire ASTM F2063 certified

Nickel-titanium round wire multi polished

Precision drawn Nitinol wire

Deskripsi Produk

Nitinol Round Wire ASTM F2063 Certified Precision Drawn Nickel-Titanium Round Wire with Multi Polished Surface Finishes

1. Product Description

Produced via dual vacuum induction and arc remelting followed by multi-pass cold drawing, this nitinol round wire strictly locks nickel-titanium atomic ratios within ASTM F2063 thresholds to cut trace harmful impurities. Customized heat treatment calibrates precise Af transformation points ranging from -30°C to 70°C, balancing stable room-temperature superelasticity and thermal-activated shape memory. Multi-stage surface polishing eliminates micro burrs to boost biocompatibility and cyclic fatigue lifespan, with tightly controlled diameter tolerances covering ultra-fine micro strands to thick structural wire. Tunable mechanical performance fits minimally invasive medical hardware, orthodontic appliances and lightweight aerospace micro actuation assemblies across all global regions.

2. Standard Parameter Table (Chemistry / Mechanical / Dimension / Executive Standard Calibrated)

Classification	Specific Specification	Supplementary Notes
Chemical Composition (wt%, ASTM F2063)	Ni:54.5–57.0, Ti:Balance; C≤0.005, Fe≤0.025, O+N≤0.05, H≤0.002, Co/Cu/Cr≤0.005	Medical VIM-VAR clean melt grade
Superelastic UTS (22℃ Test)	≥1000–1300 MPa	Graded per alloy code S/C/D
Minimum Elongation	≥10%	Straightened SE delivery status
Upper Plateau Stress	≥400–480 MPa	Corresponding to alloy grade
Permanent Set after 6% Strain	＜0.5%	Low deformation for implant long-term stability
Optional Af Transformation Temp	-30℃ / -20℃ / 0–15℃ / 17±7℃ / 30±10℃ / 50±10℃ / 70±10℃	Custom thermal tuning supported
Full Diameter Range	0.013mm – 4.0mm	Ultra-fine micro wire to thick industrial round wire
Diameter Tolerance Rule	0.013–0.05mm: ±0.002mm; 0.08–0.26mm: ±0.004–0.005mm; 0.35–4.0mm: ±0.007–0.02mm	Tighter tolerance available on request
Available Surface Treatments	Black oxide, light oxide, etched, bright polished, ultra-gloss ground finish	Biocompatible polishing for implant use
Mandatory Executive Standards	ASTM F2063-18, ASTM F2516-18, ISO 10993	Global medical & aerospace alloy benchmarks
Standard Delivery Forms	Spooled continuous wire, fixed cut lengths, compact coils	Tangle-free uniform winding

3.Advantage

Double vacuum melting drastically reduces internal inclusions, supporting millions of cyclic bending without fatigue fracture for permanent implant devices
Wide spectrum of customizable Af temperatures to match human physiological temperature and aerospace extreme thermal cycling environments
Multi-grade superelastic mechanical indexes, providing gentle continuous force for orthodontic alignment and high rigidity for interventional guidewires
Graded ultra-tight diameter tolerances for micro minimally invasive instruments and large industrial shape-memory actuators
Multiple optional surface finishes, balancing low-friction biocompatibility for surgery and cost-effective oxidation surface for industrial actuation
Tangle-free spool & fixed-length cutting processing, lowering secondary shaping and laser machining difficulty for downstream workshops

4. Application

This nitinol round wire serves as core raw semi-finished material for cardiovascular guidewires, stone retrieval baskets, vascular braided stent filaments and orthodontic archwires across North America and Europe’s medical device labs. It also covers endodontic root canal files, intrauterine contraceptive components and minimally invasive endoscopic tool skeletons. For aerospace, Southeast Asian and Middle Eastern precision machinery sectors, it functions as micro thermal actuator wire, lightweight sensor reset components and corrosion-resistant industrial spring strands.

5. FAQ

Q1: How to select the correct Af temperature grade of nitinol round wire for human body implantation?

A: Pick grades with Af ranging from 10–30℃; these achieve complete shape recovery under 37℃ human body temperature for self-expanding implant deployment.

Q2: What surface finish is required for permanent implant-grade nitinol round wire?

A: Bright polished or ultra-gloss centerless ground finishes are recommended, which form a dense passive titanium oxide film to block nickel ion leaching inside bodily fluid.

Q3: Can ultra-fine nitinol round wire below 0.05mm be customized for micro catheter accessories?

A: All diameters from 0.013mm upwards can be produced with customized length and transformation temperature to fit micro interventional equipment design.

Q4: What testing standard regulates the mechanical performance of superelastic nitinol round wire?

A: All tensile, plateau stress and permanent set testing follows ASTM F2516-18 under 22℃ constant laboratory temperature.

Tag:

paduan ti,

Paduan Titanium,

Batang paduan titanium

Produk yang Direkomendasikan

Gelas Ti Cold Rolled Gr.4 Rod Untuk Struktur Aerospace 0.6mm 0.8mm 0.9mm

Hubungi Sekarang

Batang Paduan Titanium Gr.7 Untuk Perpipaan Lingkungan Asam Kuat Untuk Industri Nuklir

Hubungi Sekarang

Biocompatible Nitinol Flat Wire with Shape Memory for Medical Use in Orthopedic Fixation Devices

Hubungi Sekarang

Nitinol Round Wire Superelastic Strand for Orthodontic Archwire with Oral-Temperature Responsive Ultra-Smooth Polished High Cyclic Fatigue Resistance

Hubungi Sekarang

Medical Grade Nitinol Round Wire VIM-VAR Superelastic Strand with Body-Temperature Matched Af for Cardiovascular Guidewire

Hubungi Sekarang

Nitinol Tube ASTM F2063 VIM-VAR Alloy Hypotube with Ultra-Low Inclusion for Neurovascular Minimally Invasive Devices

Hubungi Sekarang

Nitinol Tube High Temperature Resistant Shape Memory Alloy Tubing for Aerospace Sensing Pipeline

Hubungi Sekarang

rincian produk

Produk

Paduan Monel

Paduan Inconel

Rintangan paduan

Paduan ekspansi

Paduan Incoloy

Paduan Pelindung

Paduan kobalt

Paduan magnetik lembut

Nikel Murni

Baja tahan karat

Logam Mulia

Produk pengelasan berbasis nikel

Paduan Suhu Tinggi

Yang lain

Paduan tembaga berilium

Busa Nikel

Nitinol Round Wire ASTM F2063 Certified Precision Drawn Nickel-Titanium Round Wire with Multi Polished Surface Finishes

MOQ:	1 meter
Harga:	Negotiatable
kemasan standar:	Kotak
Periode pengiriman:	2-30 hari
metode pembayaran:	T/T, Western Union
Kapasitas Pasokan:	20000pcs per minggu

Informasi Rinci

Deskripsi Produk

Informasi Rinci

Tempat asal

Jiangsu, Tiongkok

Nama merek

niktech

Sertifikasi

ISO 9001:2008

Nomor model

nitinol

MOQ:

1 meter

Waktu Pimpin:

7-20 hari

Kapasitas:

500000pcs per bulan

Sedang mengemas:

Pengepakan Netral

Permukaan:

Permukaan cerah

Seri:

Paduan Niti

Aplikasi:

aplikasi penggunaan medis

Membentuk:

kawat bundar

Kuantitas min Order:

1 meter

Harga:

Negotiatable

Kemasan rincian:

Kotak

Waktu pengiriman:

2-30 hari

Syarat-syarat pembayaran:

T/T, Western Union

Menyediakan kemampuan:

20000pcs per minggu

Menyoroti

Nitinol round wire ASTM F2063 certified

Nickel-titanium round wire multi polished

Precision drawn Nitinol wire

Deskripsi Produk

Nitinol Round Wire ASTM F2063 Certified Precision Drawn Nickel-Titanium Round Wire with Multi Polished Surface Finishes

1. Product Description

2. Standard Parameter Table (Chemistry / Mechanical / Dimension / Executive Standard Calibrated)

Classification	Specific Specification	Supplementary Notes
Chemical Composition (wt%, ASTM F2063)	Ni:54.5–57.0, Ti:Balance; C≤0.005, Fe≤0.025, O+N≤0.05, H≤0.002, Co/Cu/Cr≤0.005	Medical VIM-VAR clean melt grade
Superelastic UTS (22℃ Test)	≥1000–1300 MPa	Graded per alloy code S/C/D
Minimum Elongation	≥10%	Straightened SE delivery status
Upper Plateau Stress	≥400–480 MPa	Corresponding to alloy grade
Permanent Set after 6% Strain	＜0.5%	Low deformation for implant long-term stability
Optional Af Transformation Temp	-30℃ / -20℃ / 0–15℃ / 17±7℃ / 30±10℃ / 50±10℃ / 70±10℃	Custom thermal tuning supported
Full Diameter Range	0.013mm – 4.0mm	Ultra-fine micro wire to thick industrial round wire
Diameter Tolerance Rule	0.013–0.05mm: ±0.002mm; 0.08–0.26mm: ±0.004–0.005mm; 0.35–4.0mm: ±0.007–0.02mm	Tighter tolerance available on request
Available Surface Treatments	Black oxide, light oxide, etched, bright polished, ultra-gloss ground finish	Biocompatible polishing for implant use
Mandatory Executive Standards	ASTM F2063-18, ASTM F2516-18, ISO 10993	Global medical & aerospace alloy benchmarks
Standard Delivery Forms	Spooled continuous wire, fixed cut lengths, compact coils	Tangle-free uniform winding

3.Advantage

Double vacuum melting drastically reduces internal inclusions, supporting millions of cyclic bending without fatigue fracture for permanent implant devices
Wide spectrum of customizable Af temperatures to match human physiological temperature and aerospace extreme thermal cycling environments
Multi-grade superelastic mechanical indexes, providing gentle continuous force for orthodontic alignment and high rigidity for interventional guidewires
Graded ultra-tight diameter tolerances for micro minimally invasive instruments and large industrial shape-memory actuators
Multiple optional surface finishes, balancing low-friction biocompatibility for surgery and cost-effective oxidation surface for industrial actuation
Tangle-free spool & fixed-length cutting processing, lowering secondary shaping and laser machining difficulty for downstream workshops