|
| एमओक्यू: | 150 किग्रा |
| मूल्य: | Negotiatable |
| मानक पैकेजिंग: | लकड़ी का क्रेड |
| वितरण अवधि: | 2-30 दिन |
| भुगतान विधि: | एल/सी, टी/टी, वेस्टर्न यूनियन |
| आपूर्ति क्षमता: | प्रति माह 300 टन |
Monel 405 Wires are sulfur-modified nickel-copper alloy wires developed to provide improved machinability while maintaining the corrosion resistance characteristics typical of Monel alloys. Based on the Monel 400 composition, Monel 405 Wires incorporate a controlled sulfur addition, which enhances chip formation and cutting performance during machining operations. This makes them particularly suitable for precision components and automated manufacturing processes where consistent machining behavior is essential.
These wires retain excellent resistance to seawater, neutral and alkaline environments, and a wide range of industrial corrosive media. Monel 405 Wires perform reliably in marine and chemical processing applications, especially in regions such as Southeast Asia and coastal areas where chloride exposure is common. While the sulfur addition slightly reduces hot workability compared to Monel 400, it significantly improves performance in high-speed machining and fabrication environments.
Monel 405 Wires are typically used in applications where both corrosion resistance and machinability are required, including valve components, fasteners, and precision wire-based parts. They also exhibit good mechanical strength and stability under moderate stress conditions. For industries requiring efficient production of corrosion-resistant components, Monel 405 Wires provide a balanced solution combining machinability, durability, and consistent performance.
| Parameter | Value |
|---|---|
| Diameter | 0.1 mm – 10 mm |
| Length | Coil / Spool / Straight Length |
| Surface | Bright, Annealed, Pickled |
| Form | Round Wire |
| Standards | ASTM B164, UNS N04405 |
| Element | Content (%) |
|---|---|
| Nickel (Ni) | ≥ 63.0 |
| Copper (Cu) | 28.0 – 34.0 |
| Iron (Fe) | ≤ 2.5 |
| Manganese (Mn) | ≤ 2.0 |
| Carbon (C) | ≤ 0.3 |
| Silicon (Si) | ≤ 0.5 |
| Sulfur (S) | 0.025 – 0.060 |
| Property | Value |
|---|---|
| Tensile Strength | ≥ 480 MPa |
| Yield Strength | ≥ 170 MPa |
| Elongation | ≥ 35% |
| Hardness | ≤ 150 HB |
| Property | Value |
|---|---|
| Density | 8.80 g/cm³ |
| Melting Range | 1300 – 1350°C |
| Thermal Conductivity | 21.8 W/m·K |
| Elastic Modulus | 179 GPa |
| Electrical Resistivity | 0.49 µΩ·m |
Used in parts requiring efficient machining and dimensional accuracy
Applied in seawater-exposed components and wire assemblies
Suitable for corrosion-resistant internal parts
Used in systems exposed to mild corrosive environments
Applied in screws, bolts, and machined wire components
Monel 405 Wires contain sulfur to improve machinability, making them better suited for automated machining processes.
Yes, they offer good corrosion resistance in marine and chloride-containing environments.
Yes, they are specifically designed for improved machinability compared to standard Monel alloys.
They are widely used in precision components, valves, marine systems, and industrial parts.
They provide moderate strength with excellent machinability and corrosion resistance balance.
|
|
| एमओक्यू: | 150 किग्रा |
| मूल्य: | Negotiatable |
| मानक पैकेजिंग: | लकड़ी का क्रेड |
| वितरण अवधि: | 2-30 दिन |
| भुगतान विधि: | एल/सी, टी/टी, वेस्टर्न यूनियन |
| आपूर्ति क्षमता: | प्रति माह 300 टन |
Monel 405 Wires are sulfur-modified nickel-copper alloy wires developed to provide improved machinability while maintaining the corrosion resistance characteristics typical of Monel alloys. Based on the Monel 400 composition, Monel 405 Wires incorporate a controlled sulfur addition, which enhances chip formation and cutting performance during machining operations. This makes them particularly suitable for precision components and automated manufacturing processes where consistent machining behavior is essential.
These wires retain excellent resistance to seawater, neutral and alkaline environments, and a wide range of industrial corrosive media. Monel 405 Wires perform reliably in marine and chemical processing applications, especially in regions such as Southeast Asia and coastal areas where chloride exposure is common. While the sulfur addition slightly reduces hot workability compared to Monel 400, it significantly improves performance in high-speed machining and fabrication environments.
Monel 405 Wires are typically used in applications where both corrosion resistance and machinability are required, including valve components, fasteners, and precision wire-based parts. They also exhibit good mechanical strength and stability under moderate stress conditions. For industries requiring efficient production of corrosion-resistant components, Monel 405 Wires provide a balanced solution combining machinability, durability, and consistent performance.
| Parameter | Value |
|---|---|
| Diameter | 0.1 mm – 10 mm |
| Length | Coil / Spool / Straight Length |
| Surface | Bright, Annealed, Pickled |
| Form | Round Wire |
| Standards | ASTM B164, UNS N04405 |
| Element | Content (%) |
|---|---|
| Nickel (Ni) | ≥ 63.0 |
| Copper (Cu) | 28.0 – 34.0 |
| Iron (Fe) | ≤ 2.5 |
| Manganese (Mn) | ≤ 2.0 |
| Carbon (C) | ≤ 0.3 |
| Silicon (Si) | ≤ 0.5 |
| Sulfur (S) | 0.025 – 0.060 |
| Property | Value |
|---|---|
| Tensile Strength | ≥ 480 MPa |
| Yield Strength | ≥ 170 MPa |
| Elongation | ≥ 35% |
| Hardness | ≤ 150 HB |
| Property | Value |
|---|---|
| Density | 8.80 g/cm³ |
| Melting Range | 1300 – 1350°C |
| Thermal Conductivity | 21.8 W/m·K |
| Elastic Modulus | 179 GPa |
| Electrical Resistivity | 0.49 µΩ·m |
Used in parts requiring efficient machining and dimensional accuracy
Applied in seawater-exposed components and wire assemblies
Suitable for corrosion-resistant internal parts
Used in systems exposed to mild corrosive environments
Applied in screws, bolts, and machined wire components
Monel 405 Wires contain sulfur to improve machinability, making them better suited for automated machining processes.
Yes, they offer good corrosion resistance in marine and chloride-containing environments.
Yes, they are specifically designed for improved machinability compared to standard Monel alloys.
They are widely used in precision components, valves, marine systems, and industrial parts.
They provide moderate strength with excellent machinability and corrosion resistance balance.
